Technology

We place special emphasis on the quality of the materials used, ergonomics and aesthetics in the products sold by the company Stainless Factory sp. z o.o. The attention to the high standard of finishing even the smallest details means that our furniture is recognized by an increasing number of customers.

All our products are made of chromium-nickel stainless steel in grade 1.4301 (AISI 304). The construction of the products is made in a welded-electric-welded form, thanks to which it has very high rigidity and durability. The standard height of all our tables is 850mm and they are made in an open or closed form. The standard depth of the tables is 600mm or 700mm.

Work tables without a sink:

Table tops are made of 1.0mm sheet metal, glued with a smooth white laminated board, and the edges are protected by a metal profile, the edges of the tops are 40mm thick with a wall border 40mm high. The table top protrudes 15mm from the side, 30mm from the front and 80mm from the back. The legs are made of 40x40x1.2 profiles with an adjustable foot at the end, which is made of polyamide PA6 plastic, or with an adjustable stainless steel foot.

Worktops are permanently welded to the bodies. The cupboards of the tables and cabinets are made of 0.8-1.0mm thick sheet metal. 20mm thick doors are made in the form of a can (double walls) made of 0.8mm thick sheet metal. The swing doors are made in the form of a can placed on the body on stainless steel external hinges - welded in the form of a block, which creates a very solid structure with the possibility of full opening, or on the wing hinges.

Sliding doors are hung on a stainless roller guide with bearing wheels, and on the bottom are guided on the pin. The drawers are made of 0.8mm thick sheet and put onto the body, or recessed with stainless guides with a 4/5 extension and max. load of 400N, or with full extension and max. load of 500N . The bottom shelves or the bottom of the cupboard are located at a height of 150mm from the ground.

The shelves are made of 0.8-1.0 mm thick sheet metal stiffened along with a stainless profile, and the shelf itself is cut into the leg profile. The central shelves in the cupboards are made on hooks that allow you to adjust their height. The wheels mounted in the tables have a diameter of 100mm, or 125mm, all the wheels are torsional, including 2 with brakes. The wheels have a tread of full rubber of A80 hardness according to Shore scale, they can carry loads up to 800N.

Work tables with sinks or basin

The table tops with sinks are lowered by 10mm around the perimeter. They are made of 1.5 and 2.0 mm thick sheet metal and stiffened with metal profiles. The table tops with basins are made of 1.5mm thick sheet metal. The basins' chambers are made of 1.5mm thick sheet, all inner edges of the basins are rounded with a radius of R = 20. The edges of the tops are 40mm thick with a 40mm high wall border.

The table top protrudes 15mm from the side, 30mm from the front and 80mm from the back. All the tables have a front chamber cover. The legs are made of 40x40x1.2 profiles ending with an adjustable foot made of polyamide PA6 plastic, or with an adjustable stainless steel foot. Worktops are permanently welded to the bodies. The cupboards of the tables and cabinets are made of 0.8-1.0mm thick sheet metal. 20mm thick doors are made in the form of a can (double walls) of 0.8mm thick sheet metal.

The swing doors are made in the form of a can placed on the body on stainless steel external hinges - welded in the form of a block, which creates a very solid structure with the possibility of full opening, or on the wing hinges. Sliding doors are hung on a stainless roller guide with bearing wheels, and on the bottom are guided on the pin. The drawers are made of 0.8mm thick sheet and put onto the body, or recessed with stainless guides with a 4/5 extension and max. load of 400N, or with full extension and max. load of 500N.

The bottom shelves or the bottom of the cupboard are located at a height of 150mm from the ground. The shelves are made of 0.8-1.0 mm thick sheet metal and stiffened along with a stainless profile, and the shelf itself is cut into the leg profile. The wheels mounted in the tables have a diameter of 100mm, or 125mm, all the wheels are torsional, including 2 with brakes. The wheels have a tread of full rubber of A80 hardness according to Shore scale, they can carry loads up to 800N.